Products Description
Pleated pes membrane filter cartridge. large flow Water Filter element.Wholesale Large Flow Filter Cartridge.This filter element is a high-performance filter element designed specifically for high flow liquid filtration scenarios. Drawing on the core technology and structural design of 3M filters, it optimizes filter material selection and folding processes to achieve high flow processing capacity while ensuring filtration accuracy. It has strong adaptability and high cost-effectiveness, and can widely replace original filter cartridges for liquid filtration systems in industries such as water treatment, electricity, pharmaceuticals, food and beverage, effectively reducing filtration costs while ensuring filtration efficiency.Wholesale Large Flow Filter Cartridge.large flow Water Filter element.Pleated pes membrane filter cartridge.
product display
Applications
Power generation: boiler feedwater pretreatment, cooling water circulation filtration;
Petrochemicals: process water purification, wastewater reclamation, catalyst recovery filtration;
Steel and metallurgy: turbid circulating water filtration, clean circulating water treatment;
Electronics: protective prefiltration for ultrapure water systems;
Working Principle
The high-flow filter cartridge operates on a depth filtration mechanism. Liquid flows from the outside to the inside of the cartridge, passing through multi-layer filter media with graded pore sizes. Particles of varying sizes are progressively trapped on the media surface and within its internal pores, while the clean filtrate exits through the central core. As contaminants accumulate, the differential pressure between inlet and outlet gradually rises. When the pressure differential reaches the preset limit, the cartridge simply needs to be replaced.
Product Parameter
|
Filter Media |
Polypropylene membrane |
|
Micron Rating |
0.50, 1.0, 3.0, 5.0, 10, 20,50, 70,100 um |
|
Support Layers |
Polypropylene |
|
Cage, Core, End Cap |
Polypropylene |
|
O-rings/gaskets |
Silicone, Nitrile, EPDM |
|
Seal Method |
Thermal Bonded, No Adhesives |
|
Outer Diameter |
160mm with cage |
|
Length |
20 inch, 40 inch, 60 inch |
|
End Cap |
HFP, HFD, HFM, etc |
|
Filtration Area |
13 ㎡/40 inch |
|
Normal Operating Temp. |
Up to 60℃ |
|
Max.Operating Temp. |
80℃ at P≤1.0 bar |
|
Max. Operating Pressure |
4.2 bar at 25℃ |
|
Recommended change out differential pressure |
2.5 bar at 25℃ |
|
Normal Flow Direction |
Inside to outside |
|
PH Value compatibility |
1-13 |
Cooperation Cases and Certificates
factory profile
Xinxiang Jun Filters and Chemical Co.,Ltd.is a professional manufacturer engaged in the design and production of filters,filtration equipment, purification devices, and oil-water separation devices.The company has gathered a large number of professional, senior engineers and other technological elites, specializing in design research and development manufacturing.
The R&D team is strong, with a high level of professional technology and rich practical experience. The company has advanced production equipment and a complete quality and safety assurance system.
Our address
Hongqi District, Xinxiang City, Henan
Phone Number
86-18738502673
admin@junlvfilter.com
FAQ
Q: Is a higher flow rate always better?
A: No. Flow rate must be balanced with filtration precision, dirt-holding capacity, and pressure drop. Excessive flow may cause rapid clogging or reduced efficiency. Choose a model that matches your system design parameters.
Q: How do I know when to replace the cartridge?
A: Replace when the differential pressure reaches the set limit (typically 0.15–0.2 MPa), or when effluent quality noticeably declines, or when flow rate drops significantly.
Q: Can cartridges from different brands be interchanged?
A: If the interface size and seal position are identical, they can be physically installed. However, actual performance may vary due to differences in media and construction. We recommend small-batch testing before full replacement.
Q: How can I avoid buying low-quality cartridges?
A: Choose manufacturers with production qualifications and quality system certifications. Request batch-specific factory test reports. For first-time purchases, conduct on-site operational trials.
contact us
Hot Tags: Pleated pes membrane filter cartridge, China Pleated pes membrane filter cartridge manufacturers, factory, stainless steel filter element, air oil separator air compressor, air oil separator element, metal filter element, filtration element, cartridge elements
